Electromagnetic Compatibility (Emc); Fcc Statement, Applicable In U.s - Futech Nexus Manuel Utilisateur

FUTECH-Nexus4langues_Doc_A 510 S 29/06/11 18:31 Page94

Electromagnetic Compatibility (EMC)

Description
The term Electromagnetic Compatability is taken to mean the capability
of theproduct to function smoothly in an environment where electro-
magnetic radiation and electrostatic discharges are present, and without
causing electromagnetic disturbances to other equip- ment.
WARNING
Electromagnetic radiation can cause disturbances in other equipment.
Although the product meets the strict regulations and standards
which are in force in this respect, FUTECH cannot completely
exclude the possibility that other equipment may be disturbed.
CAUTION
There is a risk that disturbances may be caused in other equipment
if the product is used in conjunction with accessories from other manu-
facturers, for example field computers, personal computers, two-way
radios, non- standard cables or external batteries.
Precautions:
Use only the equipment and accessories recommended by FUTECH.
When combined with the product, they meet the strict requirements
stipulated by the guide- lines and standards. When using computers
and two- way radios, pay attention to the information about electromagnetic
compatibility provided by the manufacturer.
CAUTION
Disturbances caused by electromagnetic radiation can result in erroneous
measurements.
Although the product meets the strict regulations and standards whichin
this respect, FUTECH cannot completely exclude the possibility product
may be disturbed by very intense electromagnetic radiation, near radio
transmitters, two-way radios or diesel gener- ators.
Precautions:
Check the plausibility of results obtained under these conditions.

FCC Statement, Applicable in U.S.

WARNING
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
94