20. CHANGING THE LIGHT BULB
Warning!
Before changing the light bulb, switch off the appliance and unplug it, or pull the
fuse or the circuit breaker.
Light bulb data: 220-240 V, max. 15 W
To switch off the appliance, set the temperature regulator to position "0".
Unplug the mains plug.
To change the light bulb, undo the screw.
Press the light bulb cover and slide it backwards.
Change the defective light bulb.
Refit the light bulb cover and the screw.
Put the refrigerator back into operation.
21. NOISES DURING OPERATION
The following noises are characteristic of refrigeration appliances:
Clicks
Whenever the compressor switches on or off, a click can be heard.
Humming
As soon as the compressor is in operation, you can hear it humming.
Bubbling
When refrigerant flows into thin tubes, you can hear bubbling or splashing noises.
Splashing
Even after the compressor has been switched off, this noise can be heard for
a short time.
22. REGULATIONS,STANDARDS, GUIDELINES
This appliance is in accordance with thefollowing EU guidelines:
-73/23/EEC low voltage guidelines.
-89/336/EEC EMC Directive.
23. DISPOSALOF THEAPPLIANCE
For disposal there are several possibilities:
a)The municipality has established collection systems ,where electronic waste
can be disposed of at least free of charge to the user.
Wild disposal of waste in forests and landscapes endangers your health when
hazardous substances leak into the ground-water and fin their way into the food
chain .
13