In Case Of Malfunction; Remove Transport Packaging; Installation; Installation Location - Signature SDP3101A+ Instructions D'utilisation

6. IN CASE OF MALFUNCTION

If a malfunction occurs on the appliance, please look first in the "Trouble shooting"
section of these instructions. If the information given there does not help, please
do not perform any further repairs yourself. Under no circumstance should you
attempt to repair the appliance yourself. Repairs carried out by inexperienced
persons may cause injury or serious malfunctioning. Contact your local Service
Force Center.

7. REMOVE TRANSPORT PACKAGING

The appliance and the interior fittings are protected for transportation. Pull off
the adhesive tape on the left and right side of the door. You can remove any
remnants of adhesive using white spirit. Remove all adhesive tape and packing
pieces from the interior of the appliance.

8. INSTALLATION

To prevent the risk of electrical shock, this appliance is equipped with an earthing
plug and should be connected to a grounded socket.

9. INSTALLATION LOCATION

Before installing, carefully read the instruction in order to avoid a certain number
of problems.
Warning: to avoid a hazard due to instability of the appliance, it must be fixed
according to the instructions.

10. POSITIONING

Position the appliance away from sources of heat such as stoves, radiators, direct
sunlight etc. Maximum performance and safety are guaranteed by maintaining
the correct indoor temperature for the class of unit concerned, as specified on
the rating plate. This application perform well from N to ST.
Climate classification
Appliances must not be exposed to rain. Sufficient air must be allowed to circulate
in the lower rear section of appliances, as poor air circulation can affect
performance. Built-in appliances should be positioned away from heat sources
such as heaters and direct sunlight.
SN
N
ST
T
5
Ambient temperature
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C