Viewing Information - Finlux 42FLSY170LHD Manuel Du Propriétaire

to view Picture Settings. Select 3D Settings option
by using " " or "
3D Settings
Mode
You can customize 3D mode settings to provide best
viewing experience. Select one of these modes to
experience 3D image viewing:
Auto: Automatically switches to 3D mode if 3D
information available in HDMI source.
Side by Side: Displays 3D content which is originally
in a form of side by side.
Top bottom: Displays 3D content which is originally
in a form of top and bottom.
Off: 3D function mode is turned off.
2D Only
If content is 3D but you want to watch it in 2D, you can
switch to 2D only mode. There are 2 options (LEFT
and RIGHT) to select which side of the content you
want to watch in 2D.
NOTE: This item is available when TV is in 3D mode.
Virtual 3D
Conversion from 2D to 3D. There are 3 different levels
of depth: Low – Medium – High.
NOTE: This item is available when TV is not in 3D mode.
NOTE: Once Virtual 3D is enabled, it remains enabled
if the channel is changed. However, it will be disabled
automatically if you switch to a different source.
Left/Right Swap
You can use this setting to shift the phase of the 3D
left/right broadcast.
3D Depth Sense (optional)
This setting enables the control of 3D depth.
NOTE: If you select 3D modes, wear the supplied 3D
glasses when this message is displayed on the screen:
" button and press OK.
3D Viewing Information
Your 3D Viewing experience can be affected by the
location of the viewer and the TV set. To maximise
your enjoyment we recommend you follow the
guidelines below:
Viewing Distance
Size
(inch)
Viewing
1,30
distance
(m)
Size
(inch)
Viewing
2,50
distance
(m)
Horizontal Viewing Angle
English - 51 -
22 26 32
1,50 1,90
42 46 47
2,75 2,80
37 40
2,20 2,40
55
3,25