RS-232
RS-422
RS-485
RT
RTD
RTDB
RTOS
RTS
RTU
Runtime
RXD
S/N
S1
S2
S3
S4
Saddle
Sample Loop
Saturated BTU
Saturated Hydrocarbons
Save
Savitsky-Golay
Smoothing
SCADA
Scf
Schematic
SCM
Page B–50
See Recommended Standard 232.
See Recommended Standard 422.
See Recommended Standard 485.
See Runtime.
See Resistant Temperature Detector.
See Real Time Data Base.
See Real Time Operating System.
Communication abbreviation for Ready To Send.
See Remote Terminal Unit
The time required for an acoustic signal to travel from point A to point
B. This measurement is used in calculating the speed of Sound, gas
velocity and volume in the TotalSonic Meter.
Communication abbreviation for Receive Data.
Serial Number. The whole Serial Number is made up of a prefix of 5
digits and the suffix, a 10 digit configuration number.
Sample Line 1 (located on NGC8200 series Feed-Through Assembly).
Sample Line 2 (located on NGC8200 series Feed-Through Assembly).
Sample Line 3 (located on NGC8200 series Feed-Through Assembly).
Sample Line 4 (located on NGC8200 series Feed-Through Assembly).
A fitted plate held in place by clamps, straps, heat fusion, or welding
over a hole punched or drilled in a gas main to which a branch line or
service line connection is made. The saddle also may serve as a
reinforcing member for repair.
A tube with a given volume used in conjunction with a valve for
measuring and holding the sample gas before pushing it into the
chromatograph column.
The heating value of natural gas that is saturated with water vapor.
Hydrocarbons that contain only single bonds. They are also called
Alkanes or paraffin hydrocarbons.
This refers to a Totalflow procedure in which all the Station or
Configuration files are copied from the RDRIVE or the SDRIVE, to a file
created on a laptop.
Digital Signal Smoothing. A special class of a digital signal processing
filter. Specifically determines the coefficients that are used for signal
processing.
See Supervisory Control and Data Acquisition
Abbreviation for one standard cubic foot, a measurement of a gas
volume at a contractual, regulatory or standard specified temperature
and pressure.
Another name for a circuit diagram.
Acronym for Sample Conditioning Module.
2103971-001 – rev. AB