ABB Totalflow NGC8206 Manuel D'utilisation page 259

Configuration No.
Console Mode
Contact
Conversion Time
Coprocessor
COR
Corrected Runtime
Cos
Cosine
Counterclockwise
Counts
CPS
CPU
CPUC
CRC
Cryogenic Plant
CSA
CTS
Cubic
Cubic Centimeter
Cubic Foot
Cubic Foot Metered
Cubic Foot, Standard
2103971-001 – rev. AB
The Configuration number is a suffix of the serial number which defines
the characteristics of the unit.
A local user interface typically used with custom applications that are
not supported through any other mechanism. Also referred to as Printer
Console Mode.
Current carrying part of a switch, relay or connector.
The time required, in an analog input or output system, from the
moment a channel is interrogated (such as with a read instruction) to
the moment that accurate data is available. This could include switching
time, settling time, acquisition time, A/D conversion time, etc.
Another computer processor unit that operates in conjunction with the
standard CPU. Can be used to enhance execution speed. For example,
the 8087 is designed to perform floating point arithmetic.
See Corrected Runtime.
Correction to signal made to decrease/increase "ZERO phase" and
eliminate the shift between RT and COR for increased accuracy.
See Cosine.
The sine of the complement of an arc or angle.
Movement in the direct opposite to the rotation of the hands of a clock.
The number of time intervals counted by the dual-slope A/D converter
and displayed as the reading of the panel meter, before addition of the
decimal point.
Cycles per second; the rate or number of periodic events in one
second, expressed in Hertz (Hz).
See Central Processing Unit.
California Public Utilities Commission
See Cyclic Redundancy Check.
A gas processing plant which is capable of producing natural gas
liquids products, including ethane, at very low operating temperatures.
CSA International: Formerly Canadian Standards Association.
Canadian certification agency.
Communication abbreviation for Clear To Send.
Three-dimensional shape with six equal sides. Used in measuring
volume.
Acronym CC. Metric volume equal to a 1 Centimeter to the 3
The most common unit of measurement of gas volume in the US. It is
the amount of gas required to fill a volume of one cubic foot under
stated conditions of temperature, pressure, and water vapor.
The quantity of gas that occupies one cubic foot under pressure and
temperature conditions in the meter.
That quantity of gas which under a pressure of 14.73 psia and at a
temperature of 60 degrees occupies a volume of one cubic foot without
adjustment for water vapor content.
rd
power.
Page B–15