Evaluating Results - Beurer medical BM 77 Mode D'emploi

• Now select the desired user memory by pressing the
M1 or M2 memory buttons. If you do not select a user
memory, the measurement is stored in the most re-
cently used user memory. The relevant symbol
appears on the display.
• Using the Start/stop button
pressure monitor. The measurement is then stored in
the selected user memory.
If Bluetooth ® data transfer has been activated, data is
transferred after having confirmed the user memory. The
blood pressure monitor shows the Bluetooth
during data transfer.
Please note that you must add the blood pressure
monitor in "My devices" in the Beurer "HealthManag-
er" app to enable data transfers. The Beurer "Health-
Manager" app must be active to allow data transfers.
If the current data is not displayed on your smart-
phone, repeat the transfer as described in Chapter 8.
If you forget to turn off the blood pressure monitor, it will
switch off automatically after approximately 3 minutes. In
this case too, the value is stored in the selected or most
recent user memory and the data is transferred if Blue­
tooth data transfer has been activated. The Bluetooth
®
symbol appears on the blood pressure monitor display
during data transfer.
• Wait at least 5 minutes before taking an-
other measurement!
or
, switch off the blood
symbol
®
®

6. Evaluating results

Cardiac arrhythmia:
This instrument can identify possible cardiac arrhythmia disor-
ders during measurement and if necessary indicates the meas-
urement with the flashing icon
This may be an indicator for arrhythmia. Arrhythmia is a condi-
tion where the heart rhythm is abnormal as a result of defects
in the bioelectrical system controlling the heart beat. The symp-
toms (omitted or premature heart beats, slow or excessively fast
heart rate) may be caused, among other things, by heart dis-
ease, age, physical predisposition, excessive use of stimulants,
stress or lack of sleep. Arrhythmia can only be ascertained
through examination by your doctor.
Repeat the measurement if the flashing icon
after the measurement. Please note that you should rest for
5 minutes between measurements and not talk or move dur-
ing the measurement. If the icon
contact your doctor. Any self-diagnosis and treatment based
on the test results may be dangerous. It is vital to follow your
doctor's instructions.
Classification of measurements:
The measurements can be classified and evaluated in accor-
dance with the following table.
However, these standard values serve only as a general
guideline, as the individual blood pressure varies in different
people and different age groups etc.
It is important to consult your doctor regularly for advice. Your
doctor will tell you your individual values for normal blood
pressure as well as the value above which your blood pressure
is classified as dangerous.
29
.
is displayed
appears often, please