Before Installation - TERMA ONE Série Mode D'emploi

25. If the power cord is damaged the device should not be
used. Unplug the device and contact the manufactur-
er or distributor.
26. Regularly check if the radiator is filled with a liquid. Regularly check the device for dam-
age to ensure it is safe to use.
27. Do not allow flooding into the heating element casing.
28. The device must be disconnected from the mains during cleaning and maintenance.
29. The pressure in the radiator should not exceed 1MPa (10 bar). Ensure that an air cush-
ion is preserved in electric radiators. In central heating systems, leave one or both
valves open to prevent pressure build up due to the thermal expansion of the liquid.
Installation or disassembly
Detailed information on all possible ways of the device installation or disassembly, is avail-
able from the manufacturer or importer of the item (see footer at the bottom of the man-
ual). Below are the most important requirements and guidelines which should be strictly
followed in order to ensure a long term, unfailing operation of device.

Before installation

1. Read chapter: "Guide to safe installation".
2. If you are installing the "ONE electric radiator" go straight to point 10.
3. The device is intended for operation in a vertical position with heating element turned
upwards.
4. Always use the correct radiator approved heating mediums only (water, water with ad-
dition of radiator approved anti-freeze agent only, selected types of oil).
5. Do not turn the device on if not immersed in water or other liquid as it could cause dam-
age to thermal fuse and will not be liable for claim under warranty.
8
User manual — ONE