TERMA ONE Série Mode D'emploi page 13

Before disassembly
1. Disconnect the device from electric circuit and ensure that the radiator has cooled down
before you start disassembling the radiator.
2. Be careful — electric radiator filled with heating liquid may be very heavy. Ensure all nec-
essary safety measures.
3. Prior to disassembly make sure that water inside both the radiator and installation does
not cause any damage (close the valves, empty the radiator, etc. if required).
Utilization
This product should not be disposed of as general waste but should be brought to the ap-
propriate collection point for recycling of electric and electronic devices. This information
is present on the product, user manual and on packaging. Information on the appropriate
point for used devices can be provided by your local authority or vendor of the product.
Thank You for your effort towards environment protection.
EN
13