USE OF APPLIANCE
2.2.6 Door lights On/Off (DOOR LIGHT ON/OFF)
Your appliance contains an illumination system hidden in the door handles.
To activate the illumination system in the door handles, press and hold the [mode] button for
3 seconds.
To deactivate the illumination system, press and hold the [mode] button for 3 seconds again.
2.2.7 Cooler [COOLER]
Cooler mode is used for setting the temperature of the cooler compartment. Press the
[cooler] button to set the temperature to 2, 3, 4, 5, 6, 7 or 8 °C.
2.2.8 Freezer / Cooler 1 [ZONE 1]
This is the temperature setting button for the bottom-left compartment. By pressing the [zone
1] button the temperature of the bottom-left compartment can be set to -16, -17, -18, -19,
-20, -21, -22, -23 or -24 °C. If you want to use the bottom-left compartment as cooler, press
and hold the [zone1] button for 3 seconds to switch to this mode, then set the temperature
to 2, 3, 4, 5, 6, 7 or 8 °C.
2.2.9 Freezer / Cooler 2 [ZONE 2]
This is the temperature setting button for the bottom-right compartment. By pressing the
[zone 2] button the temperature of the bottom-right compartment can be set to -16, -17,
-18, -19, -20, -21, -22, -23 or -24 °C. If you want to use the bottom-right compartment as
cooler, press and hold the [zone2] button for 3 seconds to switch to this mode, then set the
temperature to 2, 3, 4, 5, 6, 7 or 8 °C.
2.2.10 Child lock (Key Symbol)
To activate the child lock, press and hold the [cooler]+[zone 2] buttons simultaneously for
3 seconds. When the child lock is active, other buttons will be deactivated and therefore
changing the settings you have made will be prevented. To deactivate the child lock, press
and hold the [cooler]+[zone 2] buttons simultaneously for 3 seconds.
2.2.11 Screensaver [s.saver]
This function saves energy by switching the lights on the digital indicator panel off. To activate
it, press and hold the [s.saver] button for 3 seconds. To deactivate the screensaver press
and hold the [s.saver] button for 3 seconds.
2.2.12 Night sensor
This function saves energy by switching the lights inside the refrigerator off if there is
sufficient illumination. To activate it, press and hold the night sensor [mode] and [s.saver]
buttons for 3 seconds.
2.2.13 Dealer Demo mode
This mode is reserved for service and is not related to the use of refrigerator.
2.2.14 Alarm
Once an alarm light comes on, you should contact a authorised service.
If you press [s.saver] button when there is an alarm and an exclamation mark on
the display, the alarm sound will turn off. The exclamation mark will continue to be
displayed on the digital indicator panel until the error is fixed.
EN - 41 -