Replacing The Interior Light Bulb - Teka TKI3 130 Manuel D'utilisation

Replacing the interior light
bulb
Should the light fail to work switch
off at the socket outlet and pull out
the mains plug. Follow the below
instructions to check if the light bulb
has worked itself loose.
If the light still fails to work obtain
a replacement E14 screw cap type
15 Watt (Max) bulb from your local
electrical store and then fit it as follows:
1. Switch off at the socket outlet and
pull out the mains plug. You may find
it useful to remove shelves for easy
access.
2. Remove the light diffuser cover as
shown in figure (a-b).
3. Replace the burnt-out light bulb.
4. Reassemble the light diffuser cover
as shown in figure (c)."Push firmly to
ensure cover is fitted properly."
5. Carefully dispose of the burnt-out
light bulb immediately.
"Replacement light bulb can easily be
obtained from a good local electrical or
DIY store."
11
EN