C Purpose Of The Manual; Pump And Manufacturer Identification; General Information; Danger - Warning - Annovi Reverberi RTX 30.300 Notice D'utilisation Et Installation

Purpose of the manual
The manufacturer has provided this manual to provide
the operating instructions and the criteria to be com-
plied with when installing, using and maintaining the
pump identified by designation on the cover.
The manufacturer supplies the original instructions in
Italian language.
The manufacturer may supply the original instructions in
other languages in response to statutory or commercial
requirements.
If the pump is sold, the seller must pass on this manual to
the new owner along with the appliance.
The instructions are intended for the skilled, suitably
trained operators who carry out the installation and rou-
tine maintenance procedures.
Refer to the table of contents for rapid access to the top-
ics covered.
The manufacturer reserves the right to amend the man-
ual without notice, unless the amendments refer to the
pump's level of safety.
The purchaser must ensure that the installation is de-
signed in accordance with the instructions in this manu-
al, statutory requirements, and the relevant national and
local regulations.
The technical instructions in this "Use and Installation
Manual" are the property of the manufacturer and must
be treated as confidential.

Pump and manufacturer identification

Data plate
The data plate shown here, containing essential information for safe operation is affixed to every pump.
A) Business name and manufacturer's address
B) Serial number barcode
C) Model
D) Serial number
E) Maximum delivery (l/min)
F) Maximum operating pressure (bar)
G) Maximum rpm
H) Maximum absorbed power (kW)
L) Maximum delivery (U.S. gpm)
M) Maximum pressure (psi)
N) Lubricant specifications
Manufacturer's name and address
Annovi Reverberi Spa
Via Martin Luther King, 3
41122 Modena (MO) - Italy
English language

GENERAL INFORMATION

There may be differences between the illustrations and
the pump's actual conformation, but any such differenc-
es will not affect the clarity of the instructions. If in doubt,
request the necessary explanations from the manufac-
turer.
The symbols shown and described below are used to
identify safety risks or important information.
Identifies information or procedures the failure to
comply with which may constitute a serious threat to
health and safety.
Identifies information or procedures the failure to
comply with which may constitute a threat to health
and safety or cause damage.
Identifies useful and important information or proce-
dures which should be borne in mind.
E
F
G
A
UN003400-AV
23

Danger - Warning

Caution
Information
H
1
B
C
D
L
M
N
Use and Installation