Warranty & Service - DeWalt DCS371 Guide D'utilisation

Scie à ruban industrielle sans fil de 20 v max
Masquer les pouces Voir aussi pour DCS371:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Cleaning
WARNING: Blow dirt and dust out of all air vents with clean, dry air
at least once a week. To minimize the risk of eye injury, always wear
ANSI Z87.1 approved eye protection when performing this.
WARNING: Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool. These chemicals may
weaken the plastic materials used in these parts. Use a cloth
dampened only with water and mild soap. Never let any liquid get
inside the tool; never immerse any part of the tool into a liquid.
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect the charger from the AC
outlet before cleaning. Dirt and grease may be removed from the
exterior of the charger using a cloth or soft non-metallic brush. Do not
use water or any cleaning solutions.
Accessories
WARNING: Since accessories, other than those offered by
D
WALT, have not been tested with this product, use of such
E
accessories with this tool could be hazardous. To reduce the risk of
injury, only D
WALT recommended accessories should be used with
E
this product.
Recommended accessories for use with your tool are available at
extra cost from your local dealer or authorized service center. If you
need assistance in locating any accessory, please contact D
Industrial Tool Co., 701 East Joppa Road, Towson, MD 21286, call
1-800-4-D
WALT (1-800-433-9258) or visit our website: www.dewalt.
E
com.
Repairs
The charger and battery pack are not serviceable.
To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (including brush inspection and replacement) should be
performed by a D
WALT factory service center, a D
E
service center or other qualifi ed service personnel. Always use identical
replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRANTY SERVICE: Registering your product will help you
obtain more effi cient warranty service in case there is a problem
with your product.
• CONFIRMATION OF OWNERSHIP: In case of an insurance loss,
such as fi re, fl ood or theft, your registration of ownership will serve
as your proof of purchase.
• FOR YOUR SAFETY: Registering your product will allow us to
contact you in the unlikely event a safety notifi cation is required
under the Federal Consumer Safety Act.
Register online at www.dewalt.com/register.
Three Year Limited Warranty
D
WALT will repair, without charge, any defects due to faulty materials
E
or workmanship for three years from the date of purchase. This warranty
does not cover part failure due to normal wear or tool abuse. For further
detail of warranty coverage and warranty repair information, visit www.
dewalt.com or call 1-800-4-D
does not apply to accessories or damage caused where repairs have
been made or attempted by others. This warranty gives you specifi c
WALT
E
legal rights and you may have other rights which vary in certain states
or provinces.
In addition to the warranty, D
1 YEAR FREE SERVICE
D
WALT will maintain the tool and replace worn parts caused by
E
normal use, for free, any time during the fi rst year after purchase.
16
WALT authorized
E
WALT (1-800-433-9258). This warranty
E
WALT tools are covered by our:
E

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dcs371b

Table des Matières