Brita P 1000 Mode D'emploi page 9

(fig. 7)
The max. tightening torque for the G3/8" connections may
not exceed 14 Nm! Only hose connections with gaskets
!
(5) may be used – hoses with conical screw connections
damage the connections of the filter head and invalidate any
warranty claims!
Hot water
Cold water
supply
supply
3.5 Step 5: Inserting the filter cartridge (see fig. 8)
A Remove the protective cap (1) and check if the O-Ring is installed
(see fig. 8).
B Insert the filter cartridge (4) vertically into the filter head (2).
2.
3.
5.
1.
4.
(fig. 8)
The filter cartridge can only be inserted when the locking
!
handle is open.
Make sure that the filter cartridge is positioned correctly.
C Turn the locking handle (3) until you feel it engages.
9
ENGLISH