Device Description; Specified Conditions Of Use; Residual Risk; Emergency Procedure - Güde GDS 125-12 Traduction Du Mode D'emploi D'origine

ENGLISH
18
An estimation of the level of exposure to noise should also take into account the times when the tool
is switched off or when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of noise such as: maintain the
tool and the accessories and organization of work patterns.
Exposure to noise can cause hearing loss.
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties. The operator is responsible for accidents or
risks to third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision of the
trainer during occupational education.
In case of any doubts about connection and
operation refer please to our customer center

Specified Conditions of Use

This device may only be used for grinding e.g. axes,
scissors, blades, notching tools of various lengths and
blade widths as well as textures, notching tools of any
shape, spades, planers made of tool steel above 60
HRC, taking safety regulations into account.
The machine may only be used in a technically
perfect condition and taking into account all safety
information.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
It is strictly prohibited to disassemble,
modify and purposely remove the protective
equipment on the unit and fit other protective
equipment instead.
Read and understand the
operating instructions before using
the appliance. Familiarise with the

Device description

6
5
1. Protective screen
2. + 6 abrasive wheel K 36/60
3. Workpiece support
4. Bore for work bench mounting
5. On/off Button

Residual Risk

Even when the device is used properly and all safety
regulations are complied with, there still may be
some residual risks.
· Never put your hand in the grinding disc area.
· Risk of injury for fingers and hands if the tool to
be ground is guided or supported incorrectly.
· Tool parts flying off
· noise emissions
· dust emissions
· vibrations to hand and arms
· Danger of burns
· Tool and workpiece heat up during operation.

Emergency procedure

Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
1
2
3
4