Fitting The Cosmetic Cover - Blatchford KX06V2 Guide De L'utilisateur

8 Fitting the Cosmetic Cover

Always fit the cosmetic cover after all adjustments have been made to help prevent
finger trap hazards.
1. Fit the cosmetic cover to the device at the chassis anterior pivot and carrier anterior pivot
using the 4 x M4 hex screws and 4 x spacers supplied (see figure below).
2. Tighten the screws using the 2.5 mm hex key supplied. Avoid over-tightening the screws.
M4 Hex Screw
913216
2.5
(x 4)
Spacer
236122
(x 4)
Cosmetic
Cover
236121
Avoid over-tightening the
cover screws
Fitting Cosmetic Cover
10
Chassis
Anterior Pivot
Carrier
Anterior Pivot
938411/2-0520