Fitting The Valve; Fitting The Spacer - Blatchford Silcare Breathe Locking Liner Instructions D'utilisation

11 Fitting the Valve

Do not overtighten the locking pin.
We recommend using a locking pin that has a shoulder of between 13.5 mm and 19 mm in
diameter.
1.
Put the valve on the distal cap.
3.
Torque the locking pin to 3 Nm, or tighten it with
your fingers by either 1/8 to 1/4 of a turn.

12 Fitting the Spacer

Fit the spacer between the lock and the
valve only if the lock prevents the valve from
opening.
Valve
2.
Washer
Locking Pin
Shoulder
Put the washer between the locking pin and the
valve. Apply Loctite 243 to the threads of the
locking pin.
4.
Confirm sufficient clearance in socket for valve to
operate correctly.
9
Spacer Pin Lock
938398PK1/1-0521