Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN USER MANUAL
TECHNICAL DATA
Parameter description
Parameter value
Product name
PUNCHING BALL
GR-SB-02
GR-SB-01
Base material
Ball material
Pu
Height adjustment [m]
1,6 - 2,2
1,52 - 1,6
Ball diameter [cm]
ɸ18
Base diameter [cm]
ɸ50
ɸ 48
Weight [kg]
11,3
4,9
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
Read instructions before use.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation. (general
warning sign)
Only use indoors.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may
differ from the actual product.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
The terms „device" or „product" are used in the warnings
and instructions to refer to PUNCHING BALL.
1.
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
2.
If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer's service centre.
3.
Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make
repairs yourself!
4.
Keep packaging elements and small assembly parts
in a place not available to children.
5.
Keep the device away from children and animals.
6.
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
7.
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
8.
Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
9.
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
10.
Clean the device regularly to prevent stubborn grime
from accumulating.
11.
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
12.
Keep the device away from sources of fire and heat.
13.
Do not overload the device.
14.
Before you start training, consult a doctor in
order to clarify whether there are any health
counterindications.
15.
In case you feel distressing symptoms such as chest
pain, dizziness, short breath, etc. during training, you
should immediately stop the training and consult the
doctor.
16.
During use, the product bounces towards the user,
bystanders should be kept at a safe distance.
17.
The product is not intended for professional strength
training.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The product is intended for upper body parts training.
The product is intended for home use only!
The user is liable for any damage resulting from
unintended use of the device.
3.1. PREPARING FOR USE
APPLIANCE LOCATION
Keep the product away from hot surfaces. The device
should always be used when positioned on an even, stable,
clean, fireproof and dry surface, and be out of the reach
of children and persons with limited mental and sensory
functions.
6
7
ASSEMBLING THE APPLIANCE
MODEL GR-SB-02
No.
A
B
C
Mounting screw M6
D
Flange screw M8
E
F
G
Rotating rod
H
I
Attachment
J
Screw
K
Housing
Spanner
Hexagonal spanner
I
6
J
7
K
E
3
C
4
1
1.
Fill the base (G) with sand or water.
2.
Secure with the plug.
1
1
3
12
3.
Install the connector on the base with the screws.
1
4.
Attach the punching ball (H) and the cap (I) to the
rod.
1
1
1
1
1
1
1
1
H
5.
Attach the rod (G) and the punching ball to the rod
5
(E).
G
F
6.
Install the housing on the rod.
D
B
2
7.
Screw the rod to the connector.
A
Publicité
Table des Matières
