Stopping; Counter Function; Safety Systems - Zummo ZG14 Manuel D'utilisation

x
When you press the tap down, the juicer will start working and the screen will display a
Clock icon and the word "Run", while the machine is working. In order to stop the machine,
just release the tap.
x
ATTENTION!!!: Do NOT place your hand into the basket while the machine is operating
(Fig.23).
5

STOPPING

Once you release the tap, the juicer will finish the cycle, so the cups stops at the initial correct
upright position, and the digital screen displays a "Clock icon and a Stop sign". Once the
machine stops, the screen will display an orange icon, indicating that the juicer is ready to
squeeze again. The cups must always be in an upright position.
6

COUNTER FUNCTION

The display stores the total number of cycles* completed. To visualize the figure,
ƒ
With the machine stopped and in stand-by, press the STOP button.
ƒ
The figure will appear on the display for a few seconds.
Bear in mind that all machines show a minimum of 400 to 500 cycles completed for quality
control testing.
*(cycle = complete set of movements to squeeze a piece of fruit)
7

SAFETY SYSTEMS

The machine has various safety systems:
1 If the Front Cover is not assembled or is improperly assembled, the display will
show an Error message with the Front Cover and Hopper symbols flashing.
COUNTER
15