Steinbach Comfort 50 Notice Originale page 57

Connecting the pressure line
1. Push one end of the pressure hose
onto the pump outlet
2. Place a hose clamp
pressure hose. Using a Phillips
screwdriver PH1
the hose clamp clockwise to tighten
the hose clamp over the connection.
3. Place the second hose clamp over the
pressure hose.
4. Push the end of the pressure hose
onto the pressure line
on the valve head
5. Position the hose clamp on the
connection and tighten this one as
well with a Phillips screwdriver.
The pressure line
30
Connecting the suction line
Connecting the suction line with the self-fastening hose
- When using self-fastening hoses Ø 32 / 38 mm.
1. Screw a hose adapter
onto the prefilter cover
2. Make sure that water from the supply
or drain line does not flow into the
pool.
3. Push the hose end onto the hose
adapter and use the hose clamps to fix
the hose in place.
The suction line is connected.
Connecting the suction line
- When using screw-on INTEX hoses.
.
25
over the
16
, turn the screw on
40
connection
30
.
1
is connected.
clockwise
12
.
11
Comfort 75
10
14
11
30
12
12
Comfort 50
14
16
25
1
11
57