Troubleshooting - mundoclima MUPO-09-H10 Manuel D'installation

Symptom Inspection
 Check
The unit is
 Check if the water level
not
operating.
 Check
 Check the air filter for dirt.
 Check if the air duct is
The unit
 Check if the room door or
works with
reduced
 Check
capacity.
 The
 Overflow while moving the
Water
Leakage
 Check if the drain hose is
 Check if the unit is securely
Excessive
 Check
Noise
 Noise sounds like water
the
connection in securely.
indicator lights up?
the
temperature.
blocked.
window is open.
if the
operating mode is selected
and the temperature
properly set.
exhaust
detached.
unit.
kinked or bends.
positioned.
if any
vibrating parts.
flowing.

7. TROUBLESHOOTING

Solution
power  Insert
securely into the wall Outlet.
 Empty
remove the rubber plug.
room  The
temperature is 5-35°C.
 Clean
necessary.
 To clear the obstacle.
 Keep the door and windows
closed.
desired
 Set
temperature at proper set-
is
point according the manual.
hose is  Make sure the exhaust hose is
securely attached.
 Empty the water tank before
transport.
 Straighten the hose to avoid a
trap existing.
 Place the unit on horizontal
and firm ground.
loose,
 Secure and tight the parts.
 Noise comes from flowing
refrigerant. This is normal.
67
the power
the drain pan
range of operating
the air filter
the mode
cord
by
as
and