Start-Up And Shutdown; Operation Mode - mundoclima MUPO-09-H10 Manuel D'installation

5.4 SETTINGS

5.4.6. Start-up and Shutdown

Press POWER to turn the unit on.
The unit runs in FAN as default.
Press MODE button to select the desired operation mode.
Press POWER again to turn off the power.

5.4.7. Operation mode

The unit has four operation modes: Cool, heating, fan and dry, and the
sleep mode.
A. Cooling
Select the cool mode to lower the temperature in your room.
Press MODE button repeatedly until the LED of COOL operation lights
up.
Press UP/DOWN button to adjust the temperature which is displayed
on the screen. The temperature can be set between 16℃ and 32℃.
Press SPEED button repeatedly until the desired fan speed indicator
lights up.
To control the direction of the air flow horizontally, please adjust the inner
louver by hand.
Note: The air conditioner stops if the room temperature is lower than
selected temperature.
59