Using Your Foodi™ Tendercrisp™ Pressure Cooker; Using The Crisping Lid; Using The Cooking Functions With The Crisping Lid; Air Crisp - Ninja Foodi TenderCrisp OP301C Guide D'utilisation

USING YOUR FOODI™
TENDERCRISP™ PRESSURE COOKER
DROP THE TOP
The two lids allow you to seamlessly transition
between all your favorite cooking methods.
Use the pressure lid to tenderize, then use the
crisping lid to crisp up your food.

USING THE CRISPING LID

The crisping lid is affixed to the unit by a
hinge and features an easy-open design.
The lid can be opened during any convection
cooking function so you can check on
and access the ingredients. When the lid
is opened, cooking will stop, the timer will
pause, and the heating element in the lid
will turn off. When the lid is closed, cooking
will begin again and the timer will resume
counting down.
USING THE COOKING FUNCTIONS
WITH THE CRISPING LID
To turn on the unit, plug the power cord into a
wall outlet, then press the button.

Air Crisp

1
Press the AIR CRISP button. The default
temperature setting will display. Use the
up and down arrows to choose a
temperature between 300°F and 400°F.
10 ninjakitchen.com
2 Use the up and down arrows to
set the cook time in minute increments
up to 1 hour.
3 With the pot installed, place either the
Cook & Crisp™ Basket or reversible rack
in the pot. Basket should have diffuser
attached.
OR
NOTE: It is recommended to let the
unit preheat for 5 minutes before
adding ingredients. If preheating, before
step 4, close the lid, and press the
button to begin.
4 Add ingredients to the Cook & Crisp™
Basket or reversible rack. Close the
lid and press the button to begin
cooking.
5 During cooking, you can open the
lid and lift out the basket to shake or
toss ingredients for even browning,
if needed. When done, lower basket
back into pot and close lid. Cooking will
automatically resume after lid is closed.
NOTE: If you press the
button
during Air Crisp Mode, the unit will wait 10
seconds before entering Standby mode.
6 When cook time is complete, the unit
will beep.

Roast

1
Press the ROAST button. The default
temperature setting will display. Use the
up and down arrows to choose a
temperature between 250°F and 400°F.
2 Use the up
and down arrows to
set the cook time in minute increments
up to 4 hours. After 1 hour, you may
increase the time in 5-minute increments
up to 4 hours.
NOTE: If running for 1 hour or less, the
clock will count down by minutes and
seconds. If running for more than 1 hour,
the clock will count down by minutes only.
NOTE: It is recommended to let the unit
preheat for 5 minutes before adding
ingredients. If preheating, before step 3,
close the lid, and press the button
to begin.
3 Add ingredients, along with any
accessories called for in your recipe, to
the pot. Close the lid and press the
button to begin cooking.
4 When cook time is complete, the unit
will beep.
ninjakitchen.com 11