Using The Control Panel; Function Buttons; Operating Buttons; Before First Use - Ninja Foodi TenderCrisp OP301C Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING THE CONTROL PANEL

HH:MM

FUNCTION BUTTONS

PRESSURE: Use to cook food quickly
while maintaining tenderness.
STEAM: Use to gently cook delicate foods
at a high temperature.
SLOW COOK: Cook your food at a lower
temperature for longer periods of time.
SEAR/SAUTÉ: To use the unit as a
stovetop for browning meats, sautéing
veggies, simmering sauces, and more.
AIR CRISP: To use the unit as an air fryer
to give foods crispiness and crunch with
little to no oil.
ROAST: To use the unit as an oven for
tender meats, baked treats, and more.
BROIL: Use to caramelize and brown
your food.
DEHYDRATE: Dehydrate meats, fruits,
and vegetables for healthy snacks.
8
ninjakitchen.com

OPERATING BUTTONS

arrows: Use the up
and down
arrows to adjust the cook temperature
and/or pressure level.
arrows: Use the up
and down
arrows to adjust the cook time.
NOTE: While cooking, to adjust temp or
time, use the up and down arrows. The
unit will then resume at those settings.
button: Press the
button after
selecting your temperature (or pressure)
and time to start cooking. Pressing this
button while the unit is cooking will stop
the function.
KEEP WARM button: After pressure
cooking, steaming, or slow cooking, the
unit will automatically switch to Keep Warm
mode and start counting up. Keep Warm
will stay on for 12 hours, or you may press
KEEP WARM to turn it off. Keep Warm
mode is not intended to warm food from a
cold state but to keep it warm at a food-
safe temperature.
button: The
button shuts the unit off
and stops all cooking modes.
STANDBY MODE
After 10 minutes with no interaction with
the control panel, the unit will enter
standby mode.

BEFORE FIRST USE

1
Remove and discard any packaging
material, promotional labels, and tape
from the unit.
2 Remove all accessories from the
package and read this manual carefully.
Please pay particular attention to
operational instructions, warnings,
and important safeguards to avoid
any injury or property damage.
3 Wash the pressure lid, silicone ring,
removable cooking pot, Cook &
Crisp™ Basket, reversible rack, and
condensation collector in hot, soapy
water, then rinse and dry thoroughly.
NEVER clean the cooker base or
pressure lid in the dishwasher. Inspect
the pressure lid to ensure there is no
debris blocking the valves.
4 The silicone ring is reversible and can
be inserted in either direction. Insert the
silicone ring around the outer edge of
the silicone ring rack on the underside
of the lid. Ensure it is fully inserted and
lies flat under the silicone ring rack.
INSTALLING THE
CONDENSATION COLLECTOR
To install the condensation collector, slide it
into the slot on the cooker base. Slide it out
to remove it for hand-washing after each use.
NOTE: Prior to each use, make sure the
silicone ring is well seated in the silicone
ring rack and the anti-clog cap is mounted
properly on the pressure release valve.
REMOVING & REINSTALLING
THE ANTI-CLOG CAP
Make sure your anti-clog cap is in the
correct position before using the pressure
lid. The anti-clog cap protects the inner
valve of the pressure lid from clogging
and protects users from potential food
splatters. It should be cleaned after every
use with a cleaning brush. To remove it,
squeeze and pull upward. To reinstall,
position it in place and press down.
ninjakitchen.com
9

Publicité

Chapitres

Table des Matières
loading

Table des Matières