Carrier Type C Manuel D'installation page 5

Control
position.
time.
al
on the control.
Centralised seasonal changeover can be done in two ways:
- by a switch located on the central control panel that allows
entering water pipe.
sensor.
adequately insulated.
changeover.
The control has an input that can be used as window contact or
presence detection.
or to
seconds.
OFF
selection is active.
n operation:
powered at 230V.
heating mode and vice versa.
FAN
Keep on pressing this button to select the automatic
Its purpose is to maintain the temperature at the desired level.The
Bl
ON Indicates that the control is in cooling
ON Indicates that the control is in heating
ON
selected speed.
ON
set automatically.
ON
mode.
Indicates that the control is in
E N G L I S H
protection
mode.
GB - 3