Maintenance And Care; Contact Information - CALIMA 46008 Manuel De L'opérateur

5. OPERATING INSTRUCTIONS
5.1 OVERVIEW
1 Key
2 Protective cover
3 Mounting hole
4 Connecting bolts
5.2 INSTALLATION
Attach the battery disconnector to a firm base, wall panel, battery case,
partition wall to the cargo box, steering column or similar. Refer to Figure 2
for the installation dimensions. Ensure there is sufficient space to connect
the cable.
Ensure spacing between the connecting bolts and the
metal parts of the vehicle, such as the bodywork, engine
mount, etc.
5.3 CONNECTION
Connect the battery disconnector to the positive pole on the battery and the
positive connector on the consumer, Figure 3.
Do not connect to any consumer with high current consumption,
e.g. starter motor.
The battery disconnector is only designed for a short-term
current strength of max. 200 A.
For passenger cars, disconnect the +30 cable, steady plus. Use as short a cable as possible and always adhere to the wire cross-section. Prior to
installation, ask your workshop whether your vehicle is suitable for installing the battery disconnector.
Make sure that the connection cable is of sufficient size!
5.4 ACTIVATING THE SWITCH
Switching on: Insert the key into the switch and turn it clockwise until it locks into place.
Switching off: Tun the key anti-clockwise until it unlocks. Remove the key from the switch. Store the key in a safe place.

6. MAINTENANCE AND CARE

6.1 MAINTENANCE
If used in accordance with the intended purpose, the battery disconnector is maintenance-free.
6.2 CARE
Check at regular intervals that the connecting cable is secure.
7. NOTES REGARDING ENVIRONMENTAL PROTECTION
Do not dispose of electrical devices alongside the household waste! Electrical and electronic scrap devices must be collected sepa-
rately and disposed of in an environmentally responsible manner. Please contact your community or city administration regarding
disposal options for electrical and electronic scrap devices.

8. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Deutschland
Figure 1: Overview
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
Figure 2:
Installation dimensions
Figure 3: Connection example
info@eal-vertrieb.com
www.eal-vertrieb.com
5