Publicité
Pole mounting bracket (20) will need to be lightly pressed into backboard ribbing. Be
7.
sure to press completely into place. Attach rim (18) to backboard (22) and pole
mounting bracket (20) with knob (17), reinforcement bracket (11), and carriage bolt (16)
as shown. Tighten knob completely.
NoTe:
BoARd sTyle
MAy vARy
PRESS POLE
MOUNTING BRACKET
(20) INTO PLACE HERE
16
Carefully tip unit forward and slide
backboard assembly onto pole as shown.
22
20
sAWHoRse oR suppoRT TABle
13
WARNING!
KNoB MusT Be TIGHTeNed
coMpleTely ANd
cHecKed FoR TIGHTNess
BeFoRe eAcH use.
11
17
18
Publicité
