Publicité
5.
Attach pole assembly to base assembly as shown. Secure pole assembly to base and
wheel bracket by turning the pole assembly clockwise as shown. Tighten pole
completely and further rotate pole until struts are aligned correctly as shown in FIG B.
IMpoRTANT!
The pole should be turned
approximately 7 complete
rotations to tighten properly.
When properly tightened, the
wheel bracket will be tight
against the base. An assistant
is recommended to hold the
base in place during this step.
WARNING!
TWo cApABle AdulTs
ReQuIRed FoR THIs
pRoceduRe. FAIluRe To
FolloW THIs WARNING
could ResulT IN
seRIous INjuRy ANd/oR
pRopeRTy dAMAGe.
FIG. B
11
Publicité
