Introduction; Intended Use; Features; Package Contents - Parkside PTS 20-Li A1 Traduction Des Instructions D'origine

CORDLESS PLUNGE SAW
PTS 20-Li A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all the operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

The appliance is primarily designed for sawing
longitudinal and cross cuts in a plunge cut into
firmly supported solid wood, chip board, plywood,
aluminium, tiles, stone, plastics, and lightweight
construction materials. Any other uses of or modifi-
cations to the appliance are deemed to be improper
usage and may result in serious physical injury. Not
for commercial use.

Features

Front handle
Safety lock-out
ON/OFF switch
Rear handle
Release button for the battery pack
Battery pack
Base plate
Scale for cutting depth
Cutting depth preselector
Rip fence
Rip fence slot
Screw for rip fence
Viewing window for cutting line
│ GB │ IE
■ 22
Figure A:
Blade guard
Dust extractor connection
Spindle lock
Figure B:
Clamping flange
Clamping screw
Saw blade
Hex key
Figure C:
Laser ON/OFF switch
Laser aperture
Figure D:
Diamond-coated cutting disc
HSS circular saw blade Z85/60
HSS circular saw blade Z85/80
TCT saw blade Z85/30
Suction hose
Figure E:
High-speed battery charger
Battery display LED
Battery charge level button
Red charge control LED
Green charge control LED

Package contents

1 cordless plunge saw
1 high-speed battery charger
1 battery pack
1 TCT saw blade Z85/30 (pre-assembled)
1 diamond-coated cutting disc
1 HSS circular saw blade Z85/60
1 HSS circular saw blade Z85/80
1 guide fence
1 suction hose
1 hex key
1 carrying case
1 set of operating instructions
PTS 20-Li A1