Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Phone book
•
The telephone number is automatically dialled.
4. To end the call, press
the handset on the base station.
4.5
Answering a call
The handset starts to ring during an incoming external or internal call.
•
All registered handsets ring when there is an incoming call.
•
The call symbol
flashes in the display.
•
The caller's number appears in the display if you have caller ID
(CLIP). Contact your telephone line provider for more information. The
caller's name is also shown in the display if:
–
the number is stored with the name in the phone book;
–
the network transmits the name along with the phone number.
1. You have the following options for answering a call:
–
Press
to answer the call.
14
–
Pick up the handset from the base station (function only
possible if auto talk has been activated).
•
During the call, the symbol
name are shown for 10 seconds, then the call duration is shown in the
display.
2. To end the call, press
the handset on the base station.
4.6
Setting the loudspeaker volume
Press
or
during the call to adjust the loudspeaker volume.
4
15
You can choose between 5 different settings. The default setting is
level "3":
The volume is adjusted in the same way in hands free mode.
4.7
Setting the ringer volume on the handset
1. Press
.
17
repeatedly, select 'HS SETTINGS'.
2. Press
or
4
15
3. Press
to confirm.
17
4. Press
or
repeatedly, select 'HANDSET TONES'.
4
15
6
or (if auto hang-up is set on) replace
6
, the transmitted caller number and
or (if auto hang-up is set on) replace
6
5. Press
to confirm.
17
6. Press
or
repeatedly, select 'RING VOLUME'.
4
15
7. Press
to confirm.
17
•
The current volume is displayed and can be heard.
8. Press
or
repeatedly to select the ringer volume you
4
15
want.
to confirm your selection or press ESC
9. Press
17
the menu without saving..
To turn off the handset ringer permanently, press and hold
for approx. 3 seconds. The
8
display. To reactivate the ringer, press and hold
3 seconds.
5
Phone book
You can store 200 numbers (up to 24 digits long) with an associated name
(up to 12 characters long) in the phone book.
5.1
Save a new entry in the phone book by the phonebook
menu
1. Press
.
16
2. To add a new entry, press the menu key
ENTRY' with
.
17
'ENTER NAME' appears in the display. Enter the name using the
•
alphanumeric keys.
3. Press
and enter the telephone number.
17
4. Press
to store the entry in the phonebook or press
17
ESC
to cancel without saving the entry.
3
5.2
Save a new entry in the phone book by on-hook dial
mode
When you enter a telephone number is standby, and you press afterwards
the menu key
you can store the number direct into the
17
phonebook:
1. In standby enter the telephone number you want to store.
2. Press
.
17
Ultra SR1250
to exit
3
symbol appear in the
again for
8
and select 'NEW
17
Publicité
Table des Matières
