Selecting A Sanding Sheet; Fitting The Sanding Sheet; Dust Extraction - Parkside PMFS 200 C3 Traduction Des Instructions D'origine

♦ Re-tighten the four screws
.
♦ Check that the sander plate is fitted securely .

Selecting a sanding sheet

Removal and surface
The material removal rate and surface quality are
determined by the grain strength of the sanding
sheet .
♦ Please note that you need to use appropriate
sanding sheets with different grains for working
different materials .

Fitting the sanding sheet

WARNING!
► Always remove the plug from the mains
power socket before carrying out any work
on the appliance .
NOTE
► Before fitting a new sanding sheet, remove any
dust and dirt from the sander plate
Attaching sanding sheets using Velcro
♦ You can attach the sanding sheet to the sander
plate using Velcro .
♦ Ensure that the extraction holes on the sanding
sheet match up with those on the sander plate .
Removing sanding sheets fitted using Velcro
♦ Simply pull the sanding sheet off the sander
plate (see fig . A on the fold-out page) .
Attaching sanding sheets without using
Velcro (see fig. B on the fold-out page, not
supplied)
♦ Open the two clamping levers
♦ Push the sanding sheet under the open
clamping rail at one end and clamp it firmly
in place with the clamping lever .
♦ Follow the same procedure at the other end .
PMFS 200 C3
using the hex key
.
.

Dust extraction

WARNING! RISK OF FIRE!
► When working with power tools that have a
dust collection box or can be connected to a
vacuum cleaner via the vacuum cleaner
adapter, there is a risk of fire! In unfavourable
conditions, e .g . when sparks are flying while
sanding metal or metal residues in wood,
wood dust in the dust sack (or in the vacuum
cleaner dust bag) can spontaneously ignite .
This is a particular risk if the wood dust is
mixed with paint residues or other chemicals
and the workpiece has become hot after
being worked for a long time . Therefore, do
not allow the workpiece to overheat and
always empty the dust box or the dust bag of
the vacuum cleaner before taking a break
from work .
Wear a dust mask!
NOTE
► Perforated sanding sheets are required for
dust extraction .
GB │ IE │ 7 ■