Troubleshooting; Compliance; Battery Disposal - Petsafe PBC17-13475 Manuel D'utilisation

The green LED light
stopped fl ashing and
there is no red light.

Compliance

This equipment has been tested and found to comply with the EU Electromagnetic Compatibility
and Low Voltage Directive. Unauthorized changes or modifi cations to the equipment that are
not approved by Radio Systems Corporation could void the user's authority to operate the
equipment, and void the warranty.
This product is in compliance with the provisions of the EMC and LV directives. The Declaration of
Conformity can be found at: www.petsafe.net/customercare/eu_docs.php
IC
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.
ACMA
This device complies with the applicable EMC requirements specifi ed by the ACMA (Australian
Communications and Media Authority).

Battery Disposal

Separate collection of spent batteries is required in many regions; check the regulations in your
area before discarding spent batteries. Please see page 6 for instructions on how to remove the
battery for separate disposal. This unit operates on one (1) 9V alkaline battery; replace only with
equivalent battery. At the end of the product life, please contact our Customer Care Centre to
receive instructions on proper disposal of the unit. Please do not dispose of the unit in household
or municipal waste. For a listing of Customer Care Centre telephone numbers in your area, visit
our website at www.petsafe.net.
12

Troubleshooting

• Ensure that the battery is properly installed.
• Replace the battery.
• If the green LED light is still not fl ashing, contact the
Customer Care Centre.
www.petsafe.net