Controls And Displays - Seca 878 Mode D'emploi Et Garantie

5. Operation

Controls and displays

hold/2 in 1 key
How to weigh properly
– Press the start key with no load on the
scale.
SE(A 8. 8 . 8 . 8 . 8 .
,
secutively in the display. The scale is
then automatically set to zero and ready
for use.
– Ask the patient to mount the scale.
Once on the scale, the patient should
stand still.
– Read off the weighing result on the
digital display.
– If a load greater than 200 kg is placed
St0P
on the scale,
play.
– To switch off the scale, press the start
key again.
Automatic switch-off/stand-by mode
If no further weighing operations are performed, the scale switches off automatically after
a certain time:
in normal mode:
with the 2 in 1 function switched on:
16
0. 0 0
and appear con-
appears in the dis-
start key
St0p
kg
after 3 minutes
after 2 minutes
ON-OFF switch