Kenwood Chef Sense Mode D'emploi page 12

Using the KAT002ME Adaptor
Using the daptor
1 Lift off the slow speed outlet cover by
pressing the top and lifting off
2 With the adaptor in the position shown
(K logo on top), locate to the slow speed
outlet and rotate to lock in place
locking screw should be facing forward.
• Note: Before attempting to fit an
attachment, check inside the adaptor to
ensure the locking screw is unwound far
enough to allow the attachment to be
inserted.
3 Insert the attachment (turning both ways
until it locates), then turn the locking
screw anti-clockwise to lock in
3
position .
4 Refer to the individual attachment
manual for usage instructions.
5 Reverse the above procedure to remove
the attachment from the adaptor.
.
. The
2
2
9
Cleaning
• Always remove the attachment from the
adaptor before cleaning the parts.
• The adaptor should only be wiped over
with a damp cloth and should not be
immersed in water. Do not place the
adaptor in the dishwasher.
3