Maintenance And Care - Güde 20000 PRO Mode D'emploi Original

15. Never put the appliance near people or
animals.
16. Never aim at people or animals with the air
current.
17. Never put the pneumatic appliance near body
holes – it can lead to injuries dangerous to life!
Attention! You can get caught by the rotary tool!

Maintenance and Care

Only trained persons ate allowed to do the
maintenance.
Observing warning commands shown in the
Lasting and trouble-free function of your ratchet
screwdriver is grounded on regular lubrication. Use
only a special tool oil. Pick up a possibility of
lubrication: Use only a special tool oil. Pick up a
possibility of lubrication.
Ways of lubrication are following:
a) Via a beam added lubricator
The full maintenance unit include a beam
added lubricator and is placed on the
compressor.
b) Via a lubricator on the piping
A lubricator installed on piping supplying the
unit with sufficient amount of oil in an
immediate distance from the unit
(approximately 50 cm).
c) Manually
If there is no maintenance unit or a lubricator on
piping, 5-6 drops of oil should be put in pneumatic
connection before every putting in operation.
Store the pneumatic tool in dry rooms.
The air hose must be removed and more pneumatic
oil poured in the air intake every three months or
when the grinding machine is used less often.
Reconnect the air hose and let the eccentric
grinding machine run for app. 30 seconds so that
the compressor engine was cleaned. After cleaning,
follow all lubrication instructions.
8