General Safety Instructions - Güde 20000 PRO Mode D'emploi Original

Unit Scope of Supply (Fig. .1)
1. Handle
2. Pneumatic coupling
3. Control lever
Tool hold
4.
20000 PRO pneumatic angular bar grinding machine
Professional pneumatic bar grinding machine with double
shaft support, rubbered handle for effortless work and with
minimum vibrations. Due to the foul air duct, dust is not
thrown up on the work-piece. Safety switch against
unintentional switching on.
EU DECLARATION OF CONFORMITY
We,
Güde GmbH & Co. KG
Birkichstrasse 6
D-74549 Wolpertshausen
Germany
herewith declare that the following appliance complies with the
appropriate basic safety and health requirements of the EU Directives
based on its design and type, as brought into circulation by us
In case of alternation of the machine, not agreed upon by us,
this declaration will lose its validity.
Machine description:
20000 PRO pneumatic angular bar grinding machine
Article No.
#75165
Applicable EU Directives:
2006/42 EG
Applicable harmonised standards:
EN ISO 12100-1:2003
EN ISO 12100-2:2003
EN ISO 14121-1:2007
EN 792-7+A1:2008
EN 15744
EN 28662-1
EN ISO 8662-4
Date/authorised signature: 24.11.2010
Title of signatory:
Technical documentation: J. Bürkle FBL; QS
Guarantee
Guarantee claims according to the guarantee certificate
attached. Please, understand that we are unable to accept the
guarantee for the following reasons:
• Breach of operation and service instructions.
Necessary cleaning neglect.
• Forcible use, unprofessional handing, misuse or accident.
• Laic interventions or unprofessional attempts to do a repair.
Technical data
Operating pressure:
Air consumption:
Max. free-running revs:
.
Managing Director
Mr Arnold
6,3 bar
113-390 l/min
20000 U/ min
Air connection screw:
Recomm. hose cross sect. 10 mm
Noise data LWA:
Tool fixture:
Vibration acceleration
Weight
Operation
Safety notice!
Wear protective glasses! Wear ear protectors!
Always empty water from the compressor tank and
blow condensation out of the air hose before
everyday operation.
If seal has not yet been applied on the pneumatic
insertion wrap it with a Teflon tape (picture 2 and 3)

General safety instructions

Safety notice! Failing to follow these
instructions can cause an injury to you or
other persons.
1. Read the following Operating Instructions for
using the pneumatic appliance and follow the
safety instructions for using the pneumatic
appliance.
2. ALWAYS wear proven protective glasses, ear
protectors, a breathing mask and safety gloves.
3. Disconnect the appliance from air supply if not
used. NEVER replace any parts of the
accessories or SERVICE them if the appliance
is connected with the air supply.
4. Ensure a safe distance. Make sure you did not
lose balance.
5. Ensure that your hands could freely move while
working on the appliance to be able to execute
the work safely.
6. Use the appliance only at a speed for which it
has been designed.
7. Properly maintain the appliance and follow all
instructions for appliance lubrication and
maintenance.
8. Do not damage the hoses and connecting
pieces by carrying the appliance with its hose
or by disconnecting the hose from the air
supply by pulling. Prevent the hose from
coming into contact with high temperatures, oil
and sharp edges. The hose should be replaced
if damaged or worn out.
9. Use the appliance with allowable service
pressure only. Higher pressure would shorten
the service life of your appliance as a result of
higher load.
10. Connect the appliance with an air supply hose.
11. There can be sparks during the grinding
process.
12. Do not use any damaged grinding material.
13. Do not use any unnecessarily long delivery
hose to prevent a risk of trip.
14. Never leave the pneumatic appliance
unattended.
7
1/4"
96 dB
¼"
2,5 m/sec²
0,6 kg