Tristar AC-5500B Manuel D'utilisation page 9

Use
Always place the plug into a grounded socket.
G
A
E
B
A Mode (function) button
B Temperature up button
C Temperature down button
D On/Off (power) button
E Water full indicator
Press the on/off button (D), the device switches in the following mode:
At room temperatures between 20° C and 23° C the devi ce automatically switches on the Fan
mode. At a room temperature above the 23° C the devi ce automatically switches on the Cool
mode. The display (G) indicates the temperature of the room (between 0° C and 50° C).
Cooling
Press the on/off button (D) then press the mode button (A) and select the COOL mode, the
indicator COOL lights on, Set the desired temperature to the temperature setting buttons,
button B to set up the temperature and C key to set the temperature down.
The display will return to room temperature. If the temperature is below room temperature, the
compressor turns on and the device starts cooling. The compressor indicator (J) goes on. If the
desired temperature is reached, the fan still works but is the compressor and the
corresponding indicator (J) turn off again. With the speed button (F) select the desired fan
speed.
Fan function
Press the on/off button (D) and then press the mode button (A) and select the FAN mode, the
LED FAN will light. In FAN mode the device does not cool, the device is now used as a fan.
Auto function
This feature is designed to switch to a certain temperature to be used only as a fan above this
temperature the device will automatically turn to the air conditioning mode (cooling).
Example: Turn the power on by pressing the power button (D),
Select the COOL mode with the mode button(A), set the temperature to 25° C. Then select the
AUTO mode by pressing the mode button (A), the lights COOL and AUTO come on to 25° C
FAN function is, from 25 ° C the device cools.
F
J
I
D C
F Speed (ventilation) button
G Display window
H Timer operation indicator
I Sleep operation indicator
J Compressor operation indicator
17
If the temperature falls below the 25 ° C the FAN m ode comes on again. Attention! The
minimum set temperature in the AUTO mode is 25 ° C, when a lower temperature is selected,
the device cools only to 25 ° C.
Timer function
Press the timer function button (H) and set the desired number of hours, from 1 up to 24 hours.
The timer function is available in the cooling, fan and auto mode.
Example:
•
Set in 2 hours during the off mode, the machine will begin two hours later with the last set
mode.
•
Set in 2 hours, while the unit is in operation, the device automatically stops 2 hours later.
Sleep function
This feature only works in the cooling mode. Press the sleep function button (I).
The temperature raises in the first and second hours, respectively, 1° C per hour. Then the
device keeps the temperature down. After 12 hours in sleep mode the device will automatically
turn off. When using the sleep mode the unit automatically turns in low fan speed.
Remote control
Place the battery in the remote behind the flap on the back. Point the remote at the device and
select the desired functions on the remote control.
L
Q
P
K Control light, lights up when the keys are operated.
L Function button: cooling, ventilation or automatically.
M On/off button
N Fan speed control.
O Temperature setting button, right temperature up and left temperature down.
P Sleep function button.
Q Timer function button.
K
M
O
N
18