Master Volume - Yamaha RX-V692 Mode D'emploi

1
Tape deck keys
Controls tape deck.
F
(The A/B/C switch ( ) should be set to the "A" position.)
* DIR A, B and A/B are applicable only to double
cassette tape deck.
* For a single cassette deck with automatic reverse
function, pressing DIR A will reverse the direction of
tape running.
2
CD/LD player keys
Controls compact disc player or LD player.
(To control compact disc player, set the A/B/C switch (
the "A" position. To control LD player, set the A/B/C switch
F
( ) to the "C" position.)
* DISC is applicable only to compact disc changer.
* STOP is applicable only to LD player.
3
Tuner keys
Controls tuner.
F
(The A/B/C switch ( ) should be set to the "A" position.)
+: Selects higher preset station number.
–: Selects lower preset station number.
A/B/C/D/E: Selects the group (A – E) of preset station
numbers.
4
DSP program selector keys
Selects a DSP program when the built-in digital sound field
processor (including the Dolby Pro Logic Surround decoder) is
on.
* RX-V592 only
The functions on "9" and "0" are useless.
5
TEST key
Used for speaker balance adjustment. (For details, refer to
page 20–22.)
6
SLEEP timer key
This key is used to turn the built-in SLEEP timer on and off,
and to set the SLEEP time. (See page 35 for details.)
7
2CH/6CH selector key
When the TV/DBS or DVD/LD input source is selected,
pressing this key switches the input signals between 2 channel
stereo signals and 6 channel discrete signals. When switched
to "6CH", discrete signals from the unit connected to the 6CH
DISCRETE INPUT DVD/LD TV/DBS terminals of this unit are
selected as the input signals.
8
SYSTEM POWER and OFF keys
Pressing the SYSTEM POWER key turns the power of this unit
on and pressing the OFF key turns the power off.
* (Except U.S.A. and Canada models)
While the power is on, pressing these keys switches the unit
from the power-on mode to the standby mode, and vice
versa. (In the standby mode, the standby mode indicator on
the front panel is illuminated.)
9
RESET button
This button is inside the battery compartment.
Press this button to "reset" the internal microcomputer which
controls remote control operations. Microcomputer "reset" is
necessary when the remote control freezes.
* Pressing the RESET button will not erase learned
functions.
F
) to
0

MASTER VOLUME

Turns the volume level up and down.
A
MUTE key
When pressed, this key mutes the volume level. To resume the
original volume level, press this key again.
While muting, the indicator on the VOLUME control flashes
continuously.
B
DELAY/CENTER/REAR/SWFR selector (
TIME/LEVEL +/– keys
Adjust the delay time (DELAY), the rear channel output level
(REAR), center channel output level (CENTER) and the output
level to the SUBWOOFER OUTPUT terminal (SWFR).
Select the item which you want to adjust by pressing the
key and adjust its time or level by pressing the + or – key.
C
EFFECT ON/OFF key
Switches on/off the digital sound field processor (including the
Dolby Pro Logic Surround decoder).
D
Input selector keys
Selects input source.
E
A/B/C indicators
The position (A, B or C) selected by the A/B/C switch is shown
in red.
F
A/B/C switch
This switch must be used only when the lid of the remote
control transmitter is open. (This switch will not function when
the lid is closed.)
Normally, set this switch to the "A" position. When controlling a
Yamaha LD player by using the CD/LD player keys (
this switch to the "C" position.
G
TRANSMIT/LEARN indicator
Lights up when the remote control transmitter is transmitting
infrared signals (when a command key is pressed).
Note
When using the keys to control Yamaha components,
identify them with your component's keys. If these keys
are identical, their functions will be the same. For each key
function, refer to the corresponding instruction in your
component's manual.
RESET button
(up) and (down) keys
RX-V692 only
/ ) and
or
2
), set
37