Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Timer Delay
To set the Timer for a 1- to 24-hour delay until the air
conditioner turns off (the air conditioner must be On):
1. Press the TIMER plus button. Display will show remaining
hours before air conditioner will turn off.
2. Press the plus or minus button to adjust the delay time (1 to
24 hours).
3. To turn off the Timer, press the plus or minus button until no
delay time appears in the display.
To set the Timer to turn on the air conditioner, keeping
previous settings:
1. Turn off air conditioner.
2. Press the TIMER plus button. Display will show remaining
hours before air conditioner will turn on.
3. Press the plus or minus button to change delay time (1 to
24 hours).
4. To turn off the Timer, press the plus or minus button until no
delay time appears in the display.
To set the Timer to turn on the air conditioner, changing
the previous settings:
1. Turn on air conditioner.
2. Adjust Mode to Fan, Cool, Heat (heating models only) or
Auto.
NOTE: The temperature and fan speed cannot be set when
using Auto mode.
3. Adjust Fan Speed to High, Med or Low.
4. Adjust temperature between 64°F (18ºC) and 86°F (30ºC).
5. Wait 3 seconds before turning off air conditioner.
6. Press the TIMER plus button. Display will show remaining
hours before air conditioner will turn on.
7. Press the plus or minus button to change delay time (1 to
24 hours).
8. To turn off the Timer, press the plus or minus button until no
delay time appears in the display.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
Press the plus or minus button until no delay time appears in the
display.
To see or change the delay time (in hours):
■
The remaining time will display as long as the Timer is
activated.
■
Press the plus or minus button to increase or decrease the
time.
Sleep Mode
When Sleep mode is activated, the set temperature will
automatically increase at intervals until the timer turns off the
Sleep mode.
1. Press POWER to start the air conditioner.
2. Press MODE to choose Cool or Heat (heating models only).
10
ON
OFF
SET TIME
3. Press SLEEP.
4. Press the Timer plus or minus button to change delay time
(0.5 to 24 hours).
5. To cancel the Sleep mode, press SLEEP again.
Using the Remote Control
NOTE: Remote control may vary in appearance
+ºF
NOTES:
■
Two AAA batteries (included) power the remote control. Do
not use rechargeable batteries. Replace batteries after
6 months of use, or when the remote control starts to lose
power.
■
To operate the air conditioner with the remote control, aim the
remote control at the signal receptor from no more than 23 ft
(7 m) away.
To Turn the Air Conditioner On or Off
Press POWER.
SLEEP
SEND
DRY
Hr
-ºF
Min
POWER
POWER
Publicité
Table des Matières
