Adjusting The Height Of The Footrests; Adjusting The Inclination Of The Footplates; Fitting/Removing The Self-Propelling Wheels (Optional) - Invacare Aquatec Ocean Mode D'emploi

Shower and Toilet Commode Ocean / Ocean XL
Fitting footrests
!
IMPORTANT
▸ The assembly is the same for the right and left footrest.
1. Push the footrest with the footplate
B
front of the side part
I
the clip G. The footrest can no longer be turned to the side.

Adjusting the height of the footrests

1. Pull the footrest up a little.
B
2. Pull out the clip and push it back in in the desired position. If
G
required, pull out the footrest a little further to do this.
3. Push the footrest downwards until the groove
pin of the clip.
4. Set the second footrest to the desired height as described.
10
into the guide
D
until the groove engages with the pin of
A
engages with the
A

Adjusting the inclination of the footplates

!
IMPORTANT
The inclination of the footplates is continuously adjustable.
▸ Set the right and left footrest in the exact same way.
1. Loosen the Allen head screw
key.
2. Turn the footplate
3. Retighten the Allen head screw.
4.3 Fitting/removing the self-propelling wheels
(optional)
at the
H
Assembly and installation
on the footplate using a size 4 Allen
C
to the desired position.
D