Komet KUB Centron Powerline Mode D'emploi page 17

1
1a
2×
Fitting centring spade
Insert centring spade 1 in the core
bit. Screw in clamping screw 2 (8IP)
centrally and tighten with recom-
mended torque M d .
2
1×
Mounting instructions
1 2
x 10,3-11,3
x 12,3-16,3
Removing
the centring spade
Loosen the clamping screw
2 by one turn.
Tap the clamping screw with
a plastic hammer.
Clamping sleeve
released.
Fully unscrew the clamping
screw and then screw in
two turns.
Tap the clamping screw with
a plastic hammer.
The centring spade is now
released.
Unscrew the clamping screw
and remove the centring
spade.
ENGLISh
M d
1,28 Nm
1,8 Nm
is
1a
17