Laser Marking - Powerfix Profi HG02404 Instructions D'utilisation Et Consignes De Sécurité

- Please note that metal objects are located
more readily the easier they can be
magnetized.
- This means that iron is detected at a sig-
nificantly greater distance than copper
for example.
- Please note that power lines can only be
detected as such, if they are carrying
voltage.
- Light switches must always therefore be
switched on, so that the conductor is
carrying voltage. All the fuses must simi-
larly be inserted or switched on.
- Please note that only voltages of
230 V ~ 50 Hz are detected.

Laser marking

Use the laser marking function to align
pictures, cupboards, and other things,
vertically or horizontally.
Slide the function switch
position „LASER". A laser line is pro-
duced.
Horizontal laser line
1. Hold the multi-purpose detector hori-
zontally to the wall. To do this, direct
the product so that the air bubble in
the vial
marker lines.
2. Slide the two stud buttons
firmly downwards. The nails lightly
penetrate the wall to prevent the
multi-detector from falling.
26 GB/IE/NI
lies between the two
8
to the
9
5 11