Restoring The Factory Settings - VOX Amplification Lil' Looper Manuel D'utilisation

the Lil' Looper will start up in the normal way.
Note: The enabled/disabled state of the Auto
Power-Off function is remembered even when you
turn off the power.

Restoring the factory settings

Here's how to restore the Lil' Looper to its factory-set
state.
The following settings will be initialized and returned
to the settings set at the factory.
• Playback/recording operation mode
• Saved effect setting for each effect type
• Auto Recording Start function setting (sensitivity)
• Metronome settings ( volume, beat, tap tempo)
• Foot switch setting (option VOX VFS2 foot switch)
• Auto Power-Off setting
1.
Turn the power off.
2.
While holding down the AUTO REC button and
the CLEAR button, turn the power on.
Restoring the factory settings
3.
When the EFFECT button and CLEAR button
blinks, release the buttons.
The EFFECT button lit-up green. The CLEAR
button lit-up red.
4.
Press the EFFECT button to initialize the program.
To cancel the operation, press the CLEAR button.
When the programs have been initialized
successfully, all buttons will light up green, and
then the Lil' Looper will start up in the normal way.
When the initialization is canceled, all of the
buttons will light up red and the Lil' Looper will
start up in the normal way.
Never turn off the power while initialization is
being executed.
31