Simulation Effects; Saving An Effect - VOX Amplification Lil' Looper Manuel D'utilisation

VOX Lil' Looper Owner's manual

Simulation effects

This is a simulation of an instrument.
ACOUSTIC
This simulates an acoustic guitar.
• EFFECT knob: Adjusts the depth of the effect.
• EFFECT button + LOOP LEVEL/VALUE knob: Adjusts
the output level.
BASS
This simulates an electric bass guitar. You can apply
overdrive to this sound.
• EFFECT knob: Adjusts the amount of distortion.
• EFFECT button + LOOP LEVEL/VALUE knob: Adjusts
the output level.
RADIO
This emphasizes the middle frequency and simulates
a radio voice.
• EFFECT knob: Adjusts the depth of the effect.
• EFFECT button + LOOP LEVEL/VALUE knob:
Adjusts the output level.
28
PITCH
This is a pitch shifter.
• EFFECT knob: Adjusts the amount of pitch shift.
• EFFECT button + LOOP LEVEL/VALUE knob: Adjusts
the mix balance between the direct sound and effect
sound.

Saving an effect

With the Lil' Looper, you can save the effect settings
in each effect type.
The three types of effects saved can be switched and
controlled by the EFFECT button or the VOX VFS2 foot
switch that you can connect to the EXT.SW jack.
If the changed parameter settings are not saved
when the power is turned off, they will return
to their original settings. If you want to save the
changed settings, you can save them as follows.
1.
Select the effect type with the EFFECT button.
2.
Set the effect with the EFFECT button, EFFECT
knob and LOOP LEVEL/VALUE knob. () p. 15
"Creating phrases")