Auto Power-Off Function; Disabling The Auto Power-Off Function; Enabling The Auto Power-Off Function - VOX Amplification Lil' Looper Manuel D'utilisation

VOX Lil' Looper Owner's manual
The procedure is as follows:
• While recording, a phrase is deleted when the switch
is pressed.
• During playback, playback is stopped when the
switch is pressed.
• While overdubbing, overdubbing is stopped when
the switch is pressed.
• When a loop is stopped, a phrase is deleted when the
switch is pressed.
The other loop cannot be controlled while
recording or overdubbing.

Auto Power-Off function

The Lil' Looper has an Auto Power-Off function that
automatically turns off the power when four hours
have elapsed since the most recent or user input.
Note: Even if an there hasn't been any user input, the
Auto Power-Off function will not engage if there is
audio input present at the input jack.
Note: When the Lil' Looper is shipped from the factory,
the Auto Power-Off function is enabled.
30

Disabling the Auto Power-Off function

Here's how to disable the Auto Power-Off function.
1.
Turn the Lil' Looper's power off.
2.
While holding down the METRONOME button
and the CLEAR button, turn the power on.
While the buttons are pressed, all of the buttons
will light up green.
3.
Release the buttons.
The Auto Power-Off function will be disabled and
the Lil' Looper will start up in the normal way.

Enabling the Auto Power-Off function

Here's how to re-enable the Auto Power-Off function
after you've disabled it.
1.
Turn the Lil' Looper's power off.
2.
While holding down the TAP button and the
AUTO REC button, turn the power on.
While the buttons are pressed, all of the buttons
will light up red.
3.
Release the buttons.
The Auto Power-Off function will be enabled and