Inserting Or Replacing Batteries - VOX Amplification Lil' Looper Manuel D'utilisation

VOX Lil' Looper Owner's manual
FX: Effect
The effect is used to process the signal from the INPUT
jack.
There are a total of 12 effects. Each effect includes
three effect types. You can select and use one effect
at a time.
Each effect has two adjustable parameters. The
parameters that can be adjusted may vary according
to the effects that are selected.
Loop
Each loop records the signal from the effect. There
are two loops: Loop 1 and Loop 2. You can record
phrases totaling a recording time of 90 seconds for
the two loops.
Metronome
You can use the metronome as a guide while recording
a loop.
If the metronome is on, the Loop Quantize function
will also be activated. This function automatically
corrects the loop-end timing according to the specified
tempo, letting you create phrases that are exactly the
correct length.
8
When headphones are connected to the HEADPHONES
jack, the metronome sound can only be monitored with
the headphones.
VOX VFS2 (option)
When the optional VOX VFS2 foot switch is connected
to the EXT.SW jack, it can be used to turn the effect on
and off, select the effect type, stop the operation of each
loop separately or delete phrases.

Inserting or Replacing Batteries

The Lil' Looper requires six AA-size batteries. Korg
recommends that you use alkaline (LR6).
Do not combine new and used batteries or different
types of batteries.
1.
Check that all the buttons and LEDs are not lit up
and that the power is turned off.
2.
Remove the battery case cover.
3.
If the batteries are in the case, remove them from
the case.