About the Pre Effect and the
Loop Effect
This section explains the effect types that are available for
the Pre Effect and Loop Effect, and the parameters that can
be edited for these effects. Please refer to page 9 for details on
the signal flow.
Effect parameters
EDIT knob: This is the parameter that you can edit by
turning the EDIT knob.
PRE FX button + EDIT knob: This is the parameter that you
can edit by turning the EDIT knob while holding down the
PRE FX button.
Depending on the effect that you've selected, there might
not be a parameter that can be edited using the PRE FX
button + EDIT knob.
Control pedal: This is the parameter that can be assigned to
the control pedal. For details on how to make the
assignment, please refer to "Assigning a function to the
control pedal" on page 39.
Pre Effects
PdL: PEDAL FX
This models a stomp-box type effect.
• EDIT knob: Selects the effect type.
About the Pre Effect and the Loop Effect
Cln: A clean tone that lets the tonal character of your
guitar come through.
Co: This models a compressor pedal that is popular for its
percussive clean sound. It's perfect for the pop or funk
music of the 80's and 90's. It can also produce a singing,
mellow sustain.
Crn: This models an overdrive unit named after a half-
human half-horse being from Greek myth. When the gain
is lowered, this acts as a booster that preserves the original
sound of the guitar. Raising the gain makes this act as an
overdrive with a rich mid-range.
Od: This models a well-known overdrive pedal with a
green box; the inexpressible warmth of its sound has made
it a classic effect.
dst: This is a distortion unit that's ideal for metal.
• PRE FX button + EDIT knob: Adjusts the gain.
• Control pedal: Controls the output
: WAH
This models a Vox V847 wah pedal.
• EDIT knob: Selects the sound (effect type). The available
sounds are the same as for the PEDAL FX effect type.
()"PEDAL FX")
• PRE FX button + EDIT button: Adjusts the gain.
• Control pedal: Controls wah.
level.
29