English; General Tips; Adjustment - Corsair HS60 PRO SURROUND Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5

ENGLISH

CORSAIR iCUE
Go to corsair.com/support/downloads to download the CORSAIR iCUE software.
Using iCUE software will enable the full feature set of the HS60 PRO SURROUND headset.
The 7.1 surround sound USB adapter must be connected to your PC to use iCUE software.
Note: If the headset is used without software, some features will be disabled.
> Install the iCUE software on a PC running Windows 7, Windows 8.1, Windows 10 or later.
> After installation is complete, reboot your PC, and launch iCUE.
iCUE software can be used to:
> Select and customize audio equalizer (EQ) settings.
> Adjust microphone input volume.
> Set 7.1 surround sound on or off.
The software's built-in documentation explains how to use the HS60 PRO SURROUND's features in
greater detail.

GENERAL TIPS

Download the CORSAIR iCUE software from corsair.com/support/downloads.
Don't be afraid to use the software equalizer to adjust the audio quality to your liking. EQ presets have
been provided for popular gaming and media types.
Prolonged listening at high volumes may adversely affect your hearing. Take breaks between sessions
and always begin with the volume at the lowest possible level before increasing.
3

ADJUSTMENT

As with any audio product, reduce the volume before trying it with an audio source the first time.
You can adjust the volume with:
> The volume controller on the headset at the bottom corner of your left earcup.
> The standard Windows audio controller can also be used to adjust volume.
> Once an audio source is playing, set the volume to a comfortable level.
MICROPHONE ADJUSTMENT
Your new HS60 PRO SURROUND headset features a high performance "unidirectional" microphone
designed to reject noise other than your voice, but it must be pointed directly at your mouth to function
correctly. Bend the flexible microphone boom to best fit near to the left corner of your mouth.
We've found that about a 30 degree bend is a good place to start, but feel free to increase or decrease
this if your mic is too loud or too soft.
Enjoy your HS60 PRO SURROUND headset! If you have any questions or comments, see the back
panel of this guide for contact information.
ENGLISH
4

Publicité

Table des Matières
loading

Table des Matières