VINCENT SAV-C2 Manuel D'utilisation page 29

DIGITAL
INPUT
SAV-C2
2 CHANNEL
ANALOG
INPUT
2 CHANNEL
ANALOG
SAV-C2
INPUT
VIDEO
INPUT
SAV-C2
2 CHANNEL
ANALOG
INPUT
6.1 ANALOG
AUDIO OUTPUT
*) Use an empty socket, depending on the preamplifier input to which you have allocated the
source unit.
**) You generally only have to connect one of the three video connections. This depends on which
standards your AV-sources and the Video display support.
***) If you have a video recorder with an S-Video output, it can be used provided that one of the
preamplifier inputs "DVD/AV2" or "D-TV/AUX2" is not occupied by another source unit and can be
used instead of the preamplifier input "VCR/AUX3" to connect the video recorder.
****) The digital terminals belong to the preamplifier inputs "CD/AV1", "DVD/AV2", "D-TV/AUX2" or
"SAT/AUX1". They can be distributed as desired over them.
Vincent
56
DIGITAL
OUTPUT
CD, CD-Recorder, DAT,
audio
( **** )
MD, MD-Recorder
ANALOG
OUTPUT
audio
( * )
Tuner, Tape,
ANALOG
OUTPUT
Phono-Preamplifier
audio
( * )
VIDEO
OUTPUT
video
( *** )
Video recorder
ANALOG
OUTPUT
audio ( * )
DVD, DVD-Recorder,
SACD, DVD-Audio, etc.
CONNECTION OF ONE OR MORE
POWER AMPLIFIERS AND THE SUBWOOFER
You will find the terminals for the power amplifiers in
the "ANALOG AUDIO OUTPUT" terminal field
(16). The multi-channel input "6.1 CHANNEL
ANALOG AUDIO INPUT" (15) must not be confu-
sed with the RCA multi-channel output!
Power amplifier channels for up to 2 pairs of front
speakers (Front: right, left), one Centre speaker,
two Surround speakers (Rear: right, left), one rear
centre speaker (Surround Centre) and up to two
subwoofers can be connected using RCA connecti-
ons in the bottom part of the terminal field. The
additional pair of RCA outputs for the Front signals
(right, left) can be used to carry sound to a second
zone (another room) using a separate stereo
power amplifier and speakers.
INPUT
Stereo
power amplifier
Our sketch shows possible connections. Several
mono or stereo power amplifiers and one multi-chan-
nel power amplifier can both be used. As one possi-
ble solution, a multichannel power amplifier is shown
in the sketch.
Connect "FL" and "FR" to the channel inputs of the
power amplifier(s) for the front channels. The "CEN-
TER" connector should be connected to the channel
input of the power amplifier for the centre speaker.
"SL", "SC" and "SR" should be connected to the
power amplifier(s) for the Surround speakers.
active Subwoofer
AUDIO
IN
passive Subwoofer
INPUT
INPUT
Mono power
Multi cannel amplifier
amplifier
Vincent
57