Rear View; Remote Control - VINCENT SAV-C2 Manuel D'utilisation

REAR VIEW

12 19
15 13
12. DIGITAL INPUT: digital inputs for
the sound Connection for source devices
with digital sound outputs (DVD/CD-player,
digital TV tuner). These digital connections can
be allocated to different input channels
selectable on the machine.
13. 2 CHANNEL ANALOG AUDIO INPUT:
sound inputs for sources with stereo-
analogue sound If the sound input mode of
their preamplifier inputs is set to "digital" using
"IN MODE" (6)(21), the RCA connectors "CD",
"DVD", "SAT" or "D-TV" (14) are deactivated.
The corresponding video sockets are located in
the connection fields "VIDEO INPUT" (17).
14. REC OUT: analogue stereo recording
output The unchanged stereo sound or the sound
from both front speakers of the currently selected
source is output here for recording purposes.
15. 6.1 CHANNEL ANALOG AUDIO INPUT
Connection for a source device having analogue
multi-channel sound, e.g. SACD-Player or digital
TV-receiver. The associated video connector in
the "VIDEO INPUT" (17) field is labelled "6.1CH".
16. ANALOG AUDIO OUTPUT
RCA connections (preamplifier output connecti-
ons) for transferring sound signals separated
according to speaker channels to one or more
power amplifiers. Connecting the two types of
connectors with power amplifiers at the same
time is unnecessary.
Vincent
46
17
14 16 18 20
17. VIDEO INPUT: Input connectors for the
video signals of the AV-sources
Can be found in the two connection fields label-
led "VIDEO INPUT". For the SAV-C2 inputs "DVD"
and "D-TV" three different connection types are
possible.
18. VIDEO OUTPUT: Output connectors for
the connection of the SAV-C1 and the
video display Located in the two segments
of the "VIDEO" connection fields labelled "OUT-
PUT". Only one of all three possible connection
types is needed.
19. POWER CONTROL: Outputs for the
Standby Controller The SAV-C2 can use this
to switch two standby-capable hi-fi components
also fitted with this trigger into standby mode
when the preamplifier is switched off and back
into standard mode.
20. Mains connector and fuse holder box
Connect the mains cable to this connector and the
power supply. The small plastic casing at the
connector contains the fuse. Follow the safety
instructions on this point.

REMOTE CONTROL

Point the front of the remote control directly at the
front of the appliance, making sure there are no
objects between the remote control and the appli-
ance. The distance between the remote control
and the appliance should not be more than 7 m,
as the reliability of the remote control is affected
beyond this range.
BATTERIES
Using batteries
Handling batteries incorrectly can cause battery
acid to escape or an explosion in extreme cases.
The batteries must be correctly inserted taking note
of the polarity, which is marked in the inside of the
battery compartment.
In order to make full use of the batteries' life, do
not mix new and used batteries. Make sure that
you insert batteries of the same type.
Some batteries are rechargeable, others are not
however. Take note of the precautions and instruc-
tions that are included on all batteries.
Remove the batteries if the remote control is not
going to be used for a long time.
Under no circumstances must batteries be short-cir-
cuited, taken apart or heated up. For environmen-
tal reasons, used batteries should be disposed of in
accordance with local environmental regulations
and not put with domestic waste.
Only use AAA (LR3)
size batteries.
Make sure that you do not point the remote control
at an angle to the appliance, as beyond an angle
of ±30° to the centre axis the appliance may not
respond as well to the remote control. Change both
batteries if the distance at which the remote control
can be used effectively decreases.
Changing/Inserting batteries
a) Open and remove the battery compartment lid of
the remote control by tugging sharply on the fishpla-
te on the edge of the remote control. The battery
compartment lid is held in place magnetically, there
is no need to loosen the screws!
a
b) If necessary, remove used batteries and insert
new ones correctly as shown by the diagram in
the battery compartment.
Alt
Neu
b
c) Put the compartment cover back on and
close the battery
compartment.
c
Vincent
47